en
SANCHIT-210
SANCHIT-210 is a Layer-2/Layer-3, Managed Ethernet Switch/ Aggregation Switch, supporting 48 X 10/100/1000BaseT RJ45 electrical interfaces for interconnecting servers, clients, RAS, routers and other devices used in the internet or intranet as well as 4 x 1G/10G optical uplink ports for trunking / cascading. MACSec is supported on the four uplink ports. PoE and PoE+ (15.4W/ 30W per port) power feed option is also supported. The switch supports all the security and configuration features needed in a L2/L3 Managed switch. CLI and GUI can be accessed through out-of-band management interfaces for configuration and monitoring. SANCHIT-210 is suitable for use as a Layer2/Layer3 Managed Ethernet Switch with PoE/PoE+ option, in Enterprise and Campus networks as well as Access / Aggregation Switch in Service Provider Networks and in Data Centers (Access layer) Three variant models of the product are available for various deployment use-cases namely SANCHIT-210 (base model or super-set model with redundant PSU and PoE/PoE+ support), SANCHIT-210-NP (has redundant PSU but without PoE/PoE+ option) and SANCHIT-210-NPS (single PSU, without PoE/PoE+, smaller form-factor chassis)
- 48-port Gigabit Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
- 48 x 10/100/1000BaseT Copper RJ45 Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical).
- MACSec support on 4 x 1G/10G Uplink ports
- Switching capacity of up to 180Gbps
- Ethernet Ring Protection Support
- Standard and secured Management interfaces using CLI, console, SSH
- Redundant, hot-swappable AC power supply.
- Form-factor: 1U, 19β Rack compliant
- Ideal for campus and access/aggregation network. PoE/PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras, VoIP phones and Video IP Phones etc.
- Three product variant models are available:
- SANCHIT-210: Base model or super-set model that supports dual redundant AC Power supplies & PoE/PoE+
- SANCHIT-210-NP: Model variant that supports dual redundant power supplies but without PoE/PoE+ option
- SANCHIT-210-NPS: This Model variant has a single power supply, a small form factor chassis and without PoE/PoE+ option
- 48-port Gigabit Ethernet Layer2/Layer3 Managed Switch with PoE /PoE+ support
- 48 x 10/100/1000BaseT Copper RJ45 Ethernet interfaces in Full Duplex Mode and 4 X 1G/10G optical interfaces for uplinks (Flexible speed Network Interfaces supported on uplink ports with 4 X 1G or 10G optical).
- MACSec support on 4 x 1G/10G Uplink ports
- Switching capacity of up to 180Gbps
- Ethernet Ring Protection Support
- Standard and secured Management interfaces using CLI, console, SSH
- Redundant, hot-swappable AC power supply.
- Form-factor: 1U, 19β Rack compliant
- Ideal for campus and access/aggregation network. PoE/PoE+ allows a single Ethernet cable to provide both a data connection and enough power to network devices such as wireless access points (WAPs), IP cameras, VoIP phones and Video IP Phones etc.
- Three product variant models are available:
- SANCHIT-210: Base model or super-set model that supports dual redundant AC Power supplies & PoE/PoE+
- SANCHIT-210-NP: Model variant that supports dual redundant power supplies but without PoE/PoE+ option
- SANCHIT-210-NPS: This Model variant has a single power supply, a small form factor chassis and without PoE/PoE+ option
- Main Features
- Supports 32K MAC addresses
- IEEE 802.1q,802.1p,802.3x,802.3az,802.1x,802.1AE (MACSec on uplink ports)
- Rate limiting, Port/Flow mirroring, Traffic shaping
- 10/100/1000Base-T FDX, ANEG ports
- Link Aggregation, ARP Inspection
- POE/POE+ option on all ports with LLDP
- DHCP Snooping and Relay
- L2 switching features
- RSTP, MSTP, MRP, MVRP
- VLAN Learning, VLAN Translation & Trunking
- 512 TCAM-based QoS, VLAN & Security Profile Classification Entries
- L3 Switching and Multicast Features
- Static Routing, DSCP based QoS
- 32K L2 Multicast Groups supporting up to 1K port masks
- 2K IPv4 Multicast Groups, 512 IPv6 Multicast Groups
- VRRP, OSPF v.2/v.3
- OAM
- OAM and protection switching
- PM
- Protection
- 1:1 port protection
- ERPS
- Security
- RADIUS, TACACS+
- ACLs, IP source guard, MAC binding
- Management
- CLI-console port & SSH, GUI
- IPv4/IPv6, SNMP v1/v2c/v3
- RMON, IEEE 802.10AB-2005
- QoS
- Port default priority, User priority, Input priority mapping
- QCL, WRED
- Storm Policing
- Form Factor
- 1U, 19β rack mountable
- Dimensions (W X D X H):
- SANCHIT-210 & SANCHIT-210-NP: 445.4mm X 615 mm X 43.6mm
- SANCHIT-210-NPS: 445.5mm X 250 mm X 43.6mm
- Power Supply & Cooling
- Dual Redundant 230V AC
- Separate 230V AC for PoE/PoE+ power
- Hot-swappable Fan tray with 3 fans, right to left air-flow
- Access/Aggregation Switch in Service Provider Networks
- Layer2/Layer3 Managed Ethernet Switch with PoE/PoE+ option
- Enterprise Networks
- Campus Networks
- Office LANs
- Data Centers (Access Layer)
